Overview - Components
Contents
Overview - Components ...............................................................................................1
Section 1 - Removing Shipping Brackets
(Tab-Tensioned, "V" Surfaces only)
..............2
PLEASE READ - Safety Information ............................................................................2
Section 2 - Hanging Screen ......................................................................................... 3
Section 3 - Bottom Access Panel/Trap Door Opening and Closing ..................... 3
Section 4 - Motorized Roller/Fabric Installation ......................................................4
Section 5 - Motorized Roller/Fabric Removal ..........................................................4
Section 6 - Operation ...................................................................................................5
Section 7 - Tab-Tension Adjustment Procedure ......................................................5
Section 8 - Electrical Connections ............................................................................5
Section 9 - Limit Adjustments ..................................................................................... 5
Section 10 - Case Length Dimensions ....................................................................... 6
Section 11 - Case Width Dimensions .........................................................................6
Section 12 - Mounting Bracket Dimensions .............................................................6
Section 13 - Accessing Built-In Low-Voltage Control Unit
(LVC-IV)
........................7
Section 14 - Wiring Diagrams ...................................................................................... 7
CAUTION
Read and understand all warnings
(page 2)
before beginning installation.
Shipping Brackets Attached
to Dowel and Screen Case
(V Screens Only)
Please Note: Shipping brackets must remain in place
until product has been mounted and connected to
power
(see Sections 1 and 4 in this document.)
.
Also, DO NOT operate screen before removing
shipping brackets from screen case.
TOOLS REQUIRED
HARDWARE
(by others)
LEVEL
“E” Free Hanging
Viewing Surface
“V” Flexible Vinyl
Viewing Surface
Mounting Bracket
Mounting Bracket
Hoisting Bracket
Hoisting Bracket
Trim Flange
"E" Dowel
"V" Dowel
Leveling Bracket
Electrical Cutout
Tab Tensioning
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2022 All Rights Reserved | FORM: UltimateAccess_Inst22
Ultimate Access E and V
Electric projection screen
INSTRUCTIONS
INSTALLATION & OPERATION
If you have any difficulties installing or servicing your
Ultimate Access screen, call your dealer or Draper, Inc.
To Next Page
Need help?
General
Weight and Dimensions
