Vigor2955 User’s Guide
148
Name Display the application name of the profile that you create.
Host Address Display the IP address for VNC/RDP or SAMBA path.
Service Display the type of the service selected, e.g.,
VNC/RDP/SAMBA.
Active Display current status (active or inactive) of the selected
profile.
Click number link under Index filed to make detailed configuration.
Enable Application Service Check this box to enable this application.
Application Name Type the profile name for the application.
Application Use the drop down list to choose an application applied to this
profile.
Different application type will lead different web pages. Refer
to the following:
z Virtual Network Computing – Choose this item for accessing and controlling a
remote PC through VNC protocol.
IP Address Type the IP address for this protocol.
Port Specify the port used for this protocol. The default setting
is 5900.
To Next Page
Loading...
Need help?
General
