Vigor2955 User’s Guide
19
Online status for DHCP
Detailed explanation is shown below:
Primary DNS Display the IP address of the primary DNS.
Secondary DNS Display the IP address of the secondary DNS.
LAN Status
IP Address Display the IP address of the LAN interface.
TX Packets Display the total transmitted packets at the LAN interface.
RX Packets Display the total number of received packets at the LAN interface.
WAN1/2 Status
Line Display the physical connection (Ethernet) of this interface.
Name Display the name set in WAN1/WAN web page.
Mode Display the type of WAN connection (e.g., PPPoE).
Up Time Display the total uptime of the interface.
IP Display the IP address of the WAN interface.
GW IP Display the IP address of the default gateway.
TX Packets Display the total transmitted packets at the WAN interface.
TX Rate Display the speed of transmitted octets at the WAN interface.
RX Packets Display the total number of received packets at the WAN interface.
RX Rate Display the speed of received octets at the WAN interface.
Note: The words in green mean that the WAN connection of that interface
(WAN1/WAN2) is ready for accessing Internet; the words in red mean that the
WAN connection of that interface (WAN1/WAN2) is not ready for accessing
Internet.
To Next Page
Loading...
Need help?
General
