3.2 Access Point & Range Extender Setup
When used as an access point, the VigorAP 802 must be connected to a router and
configured in AP (Access Point) mode, or Range Extender mode.
Plug the VigorAP into a UK power socket and turn on the plug socket.
Use a twisted-pair cable with RJ-45 plugs at both ends, and plug into
Ethernet device (e.g., Vigor router) and Ethernet port of VigorAP.
There are two methods to initially configure the VigorAP.
Method 1 – Web Browser:
(a) Open a web browser
on your PC and type
https://192.168.1.2.
The https:// prefix
encrypts your connection
so that your session data
cannot be intercepted.
Without that prefix, your
data passes in clear text.
When accessing with
HTTPS, your browser
(Chrome, Firefox, Edge,
Safari etc.) will display a
security warning about
your server (the VigorAP)
having an invalid
certificate. This is normal
To Next Page
Loading...
Need help?
General
