Draytek VigorAP 800 User Manual

VigorAP 800 User’s Guide
i

Draytek VigorAP 800 Specifications

General

Wireless Standards	IEEE 802.11a/b/g/n/ac
Frequency Bands	2.4 GHz, 5 GHz
Power over Ethernet	802.3af
Antenna Type	Internal
Operating Modes	Access Point, WDS, Repeater
Security	WEP, WPA, WPA2, 802.1X
Management	Web-based, SNMP
Mounting	Wall, Ceiling
Operating Temperature	0°C to 40°C

Summary

Getting Started

1.3 Hardware Installation

Guides users through the physical setup and connection of the VigorAP 800.

Network Configuration

2.5 Accessing the Web Interface

How to access and log into the VigorAP 800's web configuration.

Web Configuration

3.1 Operation Mode

3.2 LAN Settings

3.4 Wireless LAN Settings for AP Mode

Detailed configuration for Wireless LAN when operating in AP mode.

3.5 Wireless LAN Settings for Station-Infrastructure Mode

3.6 Wireless LAN Settings for AP Bridge Modes

3.7 Wireless LAN Settings for AP Bridge-WDS Mode

3.8 Wireless LAN Settings for Universal Repeater Mode

3.9 Wireless LAN (5G) Settings for AP Mode

Wireless LAN configuration for AP mode using the 5GHz band.

3.10 RADIUS Server

3.11 System Maintenance

Management functions for system status, backups, and updates.

Application and Examples

4.1 Upgrade Firmware for Your Modem

Detailed guide on how to upgrade the modem firmware using provided tools.

4.2 Setting Different Segments for SSIDs

Troubleshooting

5.1 Hardware Status Check

5.2 Computer Network Settings Check

5.4 Factory Default Reset

Procedures for resetting the device to its factory default settings.