VigorAP 800 User’s Guide
25
Note: The Wireless LAN settings will be changed according to the Operation Mode
selected here. For the detailed information, please refer to the section of Wireless LAN.
3
3
.
.
2
2
L
L
A
A
N
N
Local Area Network (LAN) is a group of subnets regulated and ruled by modem.
Click LAN to open the LAN settings page and choose General Setup.
Note: Such page will be changed according to the Operation Mode selected. The
following screen is obtained by choosing AP as the operation mode.
IP Address
Type in private IP address for connecting to a local private
network (Default: 192.168.1.2).
Subnet Mask
Type in an address code that determines the size of the network.
(Default: 255.255.255.0/ 24)
DHCP Server
Configuration
DHCP stands for Dynamic Host Configuration Protocol. DHCP
server can automatically dispatch related IP settings to any local
user configured as a DHCP client.
Enable Server /
Disable Server
Enable Server lets the modem assign IP address to every host in
the LAN.
Disable Server lets you manually or use other DHCP server to
assign IP address to every host in the LAN.
To Next Page
Loading...
Need help?
General
