Need help?Do you have a question about the Draytek VigorAP 910C and is the answer not in the manual?
General| Model | VigorAP 910C |
|---|---|
| Wireless Standard | IEEE 802.11 a/b/g/n/ac |
| Frequency Bands | 2.4 GHz, 5 GHz |
| Maximum Data Rate (5GHz) | 867 Mbps |
| Maximum Data Rate (2.4GHz) | 400 Mbps |
| Ethernet Ports | 1 x Gigabit Ethernet |
| Antenna Type | Internal |
| Antenna Gain (2.4GHz) | 3 dBi |
| Antenna Gain (5GHz) | 5 dBi |
| SSID | Up to 8 SSIDs |
| VLAN | Yes |
| Operating Humidity | 10% to 90% (non-condensing) |
| Weight | 500 g |
| Power over Ethernet | 802.3af PoE |
| Operating Modes | Access Point, WDS, Wireless Client |
| Security | WPA3, WPA2, WPA |
| Mounting | Wall, Ceiling |
| Management | VigorACS |
| Operating Temperature | 0°C to 40°C |
Instructions for installing the VigorAP 910C, covering ceiling and wall mounting options.
Guide for connecting the VigorAP 910C to a Vigor router for centralized AP management.
Steps to connect the VigorAP 910C to a Vigor router when AP Management is not used.
How to access and navigate the VigorAP 910C's web-based configuration interface.
Procedure for changing the administrator password for enhanced security.
A wizard to guide users through initial 2.4GHz wireless settings configuration.
Selects the operational mode for the VigorAP 910C, such as AP, Repeater, or Bridge.
Configures Local Area Network (LAN) settings, including IP addressing and DHCP server options.
Enables and configures central management of VigorAP 910C units via a Vigor router.
Configuration settings for the VigorAP 910C when operating in Access Point mode on the 2.4GHz band.
General configuration parameters for 2.4GHz wireless in AP mode, including SSID and channel.
Security settings for 2.4GHz wireless networks, supporting various encryption modes.
Restricts network access based on client MAC addresses for enhanced security.
Directs wireless clients to the optimal frequency band (2.4GHz or 5GHz) for better performance.
Configuration for operating in Station-Infrastructure mode on the 2.4GHz band.
General wireless setup for Station-Infrastructure mode, including profile creation.
Settings for AP Bridge modes (Point-to-Point and Multi-Point) on the 2.4GHz band.
General configuration for AP Bridge modes, including PHY mode and security.
Configuration for AP Bridge-WDS mode on the 2.4GHz band.
General setup for AP Bridge-WDS mode, including PHY mode and security.
Security settings for 2.4GHz wireless connections in AP Bridge-WDS mode.
Controls client access to the wireless network using MAC address filtering.
Directs clients to optimal band (2.4GHz/5GHz) for improved performance.
Configuration for operating in Universal Repeater mode on the 2.4GHz band.
General wireless setup for Universal Repeater mode, including SSID and channel.
Security settings for 2.4GHz Universal Repeater mode.
Configuration settings for AP mode on the 5GHz band.
Security settings for 5GHz wireless networks.
Configuration for Universal Repeater mode on the 5GHz band.
Security settings for 5GHz Universal Repeater mode.
Settings for configuring RADIUS server for wireless client authentication.
Maintenance functions for system setup, status, passwords, backups, and firmware.
Procedure for changing the administrator password for the Web User Interface.
Process for downloading and installing the latest firmware for the device.
Tools for viewing and diagnosing the VigorAP 910C's status and performance.
Resets the device to factory default settings via software or hardware to resolve issues.
To Next Page
