Draytek VigorAP 910C User Manual

VigorAP 910C User’s Guide
196
3
3
.
.
1
1
5
5
.
.
5
5
S
S
y
y
s
s
l
l
o
o
g
g
/
/
M
M
a
a
i
i
l
l
A
A
l
l
e
e
r
r
t
t
SysLog function is provided for users to monitor AP. There is no bother to directly get into
the Web user interface of the AP or borrow debug equipments.
Available settings are explained as follows:
Item Description
Syslog Access Setup
Enable - Check Enable to activate function of Syslog.
Server IP Address -The IP address of the Syslog server.
Destination Port -Assign a port for the Syslog protocol. The
default setting is 514.
Log Level - Specify which level of the severity of the event will
be recorded by Syslog.
Mail Alert Setup
Check Enable to activate function of mail alert.
SMTP Server - The IP address of the SMTP server.
Mail To - Assign a mail address for sending mails out.
Mail From - Assign a path for receiving the mail from outside.
User Name - Type the user name for authentication.
Password - Type the password for authentication.
Enable E-Mail Alert - VigorAP will send an e-mail out when a
user accesses into the user interface by using web or telnet.

Draytek VigorAP 910C Specifications

General

Brand	Draytek
Model	VigorAP 910C
Category	Wireless Access Point
Language	English