Need help?Do you have a question about the Draytek VigorAP 906 and is the answer not in the manual?
General| 2.4 GHz | Yes |
|---|---|
| MIMO type | Multi User MIMO |
| Number of users | 254 user(s) |
| Cabling technology | 10/100/1000Base-T(X) |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 2402 Mbit/s |
| Maximum data transfer rate (2.4 GHz) | 574 Mbit/s |
| Placement | Ceiling, Table, Wall |
| Product color | White |
| Security algorithms | WEP, WPA, WPA2, WPA3, WPS |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 45 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| WAN connection | Ethernet (RJ-45) |
| USB 2.0 ports quantity | - |
| Ethernet LAN (RJ-45) ports | 5 |
| Antenna type | External |
| Antenna direction type | Omni-directional |
| Antenna gain level (max) | 2.5 dBi |
| Input current | 0.4 A |
| Output current | 1.5 A |
| AC input voltage | 48 - 56 V |
| DC voltage range | 12 V |
| Power consumption (max) | 17.3 W |
| Sustainability certificates | CE |
Provides an overview of the VigorAP 906, its capabilities, and ease of setup.
Guides on connecting the VigorAP 906 through various methods like wired, wireless, and PoE.
Details on setting up the computer's IP address to match the VigorAP's subnet for configuration.
Instructions on how to access and log in to the VigorAP 906's web-based management interface.
Procedure for changing the administrator password for enhanced security.
Overview of the dashboard's system status information and navigation.
Configuration steps for setting up the VigorAP 906 in Access Point mode.
Configuration steps for setting up the VigorAP 906 as a Mesh Root node.
Configuration steps for setting up the VigorAP 906 as a Mesh Node.
Explains the different operation modes available for the VigorAP 906.
Details general concepts of wireless LAN, including security overview and WPS.
Covers wireless LAN settings specific to the Access Point mode.
Configures basic wireless LAN settings like SSID, channel, and subnets.
Details security settings for wireless networks, including WPA/WEP options.
Allows restricting network access based on client MAC addresses.
Explains the Wi-Fi Protected Setup for easy network connection.
Configures advanced wireless transmission rate parameters.
Enables scanning for working APs in the neighborhood for WDS link setup.
Displays status of working APs connected via WDS.
Manages bandwidth usage for clients to improve network efficiency.
Ensures fair access to network airtime for all connected wireless clients.
Specifies duration for wireless clients to connect or reconnect to the VigorAP.
Enables seamless wireless network expansion by managing AP connections.
Steers wireless clients to the 5GHz band to reduce congestion on the 2.4GHz band.
Configuration settings for mesh mode, including setup, status, and discovery.
Guides on setting up mesh groups, defining roles, and adding mesh nodes.
Helps discover mesh devices and check their link status and operation mode.
Synchronizes basic configurations from the mesh root to connected mesh nodes.
Synchronizes advanced configurations from the mesh root to mesh nodes.
Lists compatible DrayTek AP models supported by this AP.
Displays mesh log information for debugging and analysis.
Configuration options for the Local Area Network (LAN) settings.
Configures general LAN settings, including IP and DHCP server settings.
Sets up profiles for captive portal, redirection, and landing pages.
Allows disabling physical LAN ports for security or connection troubleshooting.
Configures hardware acceleration (PPA) to improve data streaming performance.
Manages system settings including status, passwords, backup, and firmware.
Displays current system information, firmware version, and network settings.
Configuration for TR-069 standard for remote device management.
Allows setting or changing the administrator password for the web interface.
Enables setting a user-level password for simplified web interface access.
Provides options to backup and restore device configurations.
Configures syslog and mail alert functions for monitoring the access point.
Sets the system time and date, including NTP client configuration.
Configures SNMP services for network management.
Specifies port numbers for HTTP/HTTPS servers and TLS encryption settings.
Allows restarting the VigorAP, either with current or factory default configuration.
Guides on upgrading the VigorAP's firmware using the upgrade utility.
Enables VigorAP devices to be managed by a Vigor router.
Configures central AP management settings, including node AP and root AP roles.
Displays log information related to wireless stations and central AP management.
Manages load balance and force overload disassociation for access points.
Displays settings related to Load Balance for VigorAP, configured via Vigor router.
Controls and manages mobile devices accessing the wireless network.
Provides information on connected clients, bandwidth usage, and device OS.
Displays statistics for nearby and connected wireless stations.
Shows general information for nearby wireless stations.
Determines which devices are allowed or blocked from making network connections.
Displays information related to wireless stations connecting to the Vigor AP.
Configuration for RADIUS server, including user profiles and client settings.
Sets up the built-in RADIUS server for wireless client authentication.
Manages certificates for secure wireless connection authentication.
Provides application settings for scheduling and Wi-Fi auto on/off features.
Allows scheduling of AP functions, such as Internet access restrictions.
Automatically turns Wi-Fi on or off based on host ping status.
Settings for device objects and device groups used by other applications.
Specifies a client as a device object for use in other applications.
Groups clients for use in other applications and manages group profiles.
Introduction to the DrayTek Wireless mobile app for device management.
Guides on creating a new network using the DrayTek Wireless app.
Assists in configuring mesh root and mesh node(s) via the mobile app wizard.
Information on logging into the DrayTek Wireless app.
Navigates the network page within the app for device management.
Connects to CPE/AP devices using SSID, password, or QR code scan.
Displays the device dashboard for Mesh Root and AP modes.
Shows device lists in icon or list view for Mesh Root mode.
Manages client relationships with devices and groups within the app.
App setup page for configuring TR-069, passwords, and wireless settings.
Guides on troubleshooting network access issues by checking status stages.
Provides access to the system log for debugging.
Tests network speed to find the best installation place for the Vigor AP.
Displays data transmission charts for LAN-A or LAN-B.
Shows WLAN statistics for the 2.4GHz band, primarily for debugging.
Shows WLAN statistics for the 5GHz band, primarily for debugging.
Detects environmental interference factors for wireless channels.
Directs users to DrayTek's website for support and knowledge base.
Steps to verify the hardware status of the VigorAP, checking LEDs and connections.
Troubleshoots network failures by verifying connection settings.
Guides for checking network connection settings on Windows OS.
Guides for checking network connection settings on Mac OS.
Explains how to ping the modem to check link status.
Steps to ping the device from a Windows command prompt.
Steps to ping the device from a Mac OS terminal.
Resets the VigorAP to factory default settings via software or hardware.
Procedure for resetting the modem to factory default via the web interface.
Instructions for performing a hardware reset using the reset button.
Information on how to contact DrayTek support for further assistance.
To Next Page
