VigorAP 903 User’s Guide
162
VI-5 Backing to Factory Default Setting
Sometimes, a wrong connection can be improved by returning to the default settings. Try to reset
the modem by software or hardware.
Warning
:
After pressing the factory default setting, you will lose all settings you did before. Make sure you
have recorded all useful settings before you pressing. The password of the factory default is null.
VI-5-1 Software Reset
You can reset the modem to factory default via the Web page.
Go to System Maintenance and choose Reboot System on the web page. The following screen
will appear. Choose Using factory default configuration and click OK. After few seconds, the
modem will return all the settings to the factory settings.
VI-5-2 Hardware Reset
While the modem is running, press the Factory Reset button and hold for more than 5 seconds.
When you see the ACT LED blinks rapidly, please release the button. Then, the modem will restart
with the default configuration.
After restoring the factory default setting, you can configure the settings for the modem again to
fit your request.
To Next Page
Loading...
