Draytek VigorAP 906 User Manual

40
MAC Address Filter Display all MAC addresses that are edited before.
MAC Client’s MAC Address - Manually enter the MAC address of the
wireless client.
Add - Add a new MAC address to the list.
Delete - Delete the selected MAC address in the list.
Edit - Edit the selected MAC address in the list.
Object In addition, to enter the MAC address of the device manually, you can
Device Group - Select one of the existed device groups and click Add.
All the devices belonging to the selected group will be shown on the
MAC Address Filter table.
Device Object - Select one of the existed device objects and click Add.
The MAC address of the device will be shown on the MAC Address
Filter table.
Cancel Give up the access control set up.
Backup
Click it to store the settings (MAC addresses on MAC Address Filter
table) on this page as a file.
Restore
Click it to restore the settings (MAC addresses on MAC Address Filter
table) from an existed file.
After finishing this web page configuration, please click OK to save the settings.
II-3-4 WPS
Open Wireless LAN>>WPS to configure the corresponding settings.
Available settings are explained as follows:
Item Description
Enable WPS Check this box to enable the WPS setting.
WPS Configured Display related system information for WPS. If the wireless security

Draytek VigorAP 906 Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Number of users	254 user(s)
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	2402 Mbit/s
Maximum data transfer rate (2.4 GHz)	574 Mbit/s
Placement	Ceiling, Table, Wall
Product color	White
Security algorithms	WEP, WPA, WPA2, WPA3, WPS
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	-
Ethernet LAN (RJ-45) ports	5
Antenna type	External
Antenna direction type	Omni-directional
Antenna gain level (max)	2.5 dBi
Input current	0.4 A
Output current	1.5 A
AC input voltage	48 - 56 V
DC voltage range	12 V
Power consumption (max)	17.3 W
Sustainability certificates	CE