Draytek VigorAP 906 User Manual

44
II-3-6 AP Discovery
VigorAP 906 can scan all regulatory channels and find working APs in the neighborhood. Based on
the scanning result, users will know which channel is clean for usage. Also, it can be used to
facilitate finding an AP for a WDS link. Notice that during the scanning process (about 5 seconds), no
client is allowed to connect to VigorAP.
This page is used to scan the existence of the APs on the wireless LAN. Please click Scan to discover
all the connected APs.
Each item is explained as follows:
Item Description
SSID Display the SSID of the AP scanned by VigorAP 906.
BSSID Display the MAC address of the AP scanned by VigorAP 906.
RSSI Display the signal strength of the access point. RSSI is the abbreviation
of Received Signal Strength Indication.
Channel Display the wireless channel used for the AP that is scanned by
VigorAP 906.
Encryption Display the encryption mode for the scanned AP.
Authentication Display the authentication type that the scanned AP applied.
Mode Display the wireless connection mode that the scanned AP used.
Ch. Width Display the channel width that the scanned AP used.
Scan It is used to discover all the connected AP. The results will be shown
on the box above this button.
AP's MAC Address / Display the MAC address and SSID of the AP selected from the Access

Draytek VigorAP 906 Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Number of users	254 user(s)
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	2402 Mbit/s
Maximum data transfer rate (2.4 GHz)	574 Mbit/s
Placement	Ceiling, Table, Wall
Product color	White
Security algorithms	WEP, WPA, WPA2, WPA3, WPS
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	-
Ethernet LAN (RJ-45) ports	5
Antenna type	External
Antenna direction type	Omni-directional
Antenna gain level (max)	2.5 dBi
Input current	0.4 A
Output current	1.5 A
AC input voltage	48 - 56 V
DC voltage range	12 V
Power consumption (max)	17.3 W
Sustainability certificates	CE