Draytek VigorAP 906 User Manual

106
III-2-3 Overload Management
Load Balance can help to distribute the traffic for all of the access points (e.g., VigorAP 906)
registered to the Vigor router. Thus, the bandwidth will not be occupied by certain access points.
However, traffic overload might occur if too many wireless stations are connected to VigorAP 906
for data incoming and outgoing. Therefore, “Force Overload Disassociation” is required to terminate
the network connection of the client’s station to release network traffic. When the function of “Force
Overload Disassociation” in the web user interface of the Vigor router is enabled, wireless clients
specified in the Black List of such web page will be disassociated to solve the problem of traffic
overload.
The following web page is used to configure the white list and the Black List for wireless stations.
Available settings are explained as follows:
Item Description
White List/Black List
Display the information (such as index number, MAC address, and
comment) for all of the members in White List/Black List.
Wireless stations listed in Black List will be forcefully disconnected
first when traffic overload occurs and “Force Overload Disassociation”
is enabled.
Client’s MAC Address
Specify the MAC Address of the remote/local client.
Apply to
White List – MAC address listed inside Client’s MAC Address will be
categorized as one of the members in White List.
Black List - MAC address listed inside Client’s MAC Address will be
categorized as one of the members in Black List.

Draytek VigorAP 906 Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Number of users	254 user(s)
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	2402 Mbit/s
Maximum data transfer rate (2.4 GHz)	574 Mbit/s
Placement	Ceiling, Table, Wall
Product color	White
Security algorithms	WEP, WPA, WPA2, WPA3, WPS
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
WAN connection	Ethernet (RJ-45)
USB 2.0 ports quantity	-
Ethernet LAN (RJ-45) ports	5
Antenna type	External
Antenna direction type	Omni-directional
Antenna gain level (max)	2.5 dBi
Input current	0.4 A
Output current	1.5 A
AC input voltage	48 - 56 V
DC voltage range	12 V
Power consumption (max)	17.3 W
Sustainability certificates	CE