Draytek VigorAP 910C User Manual

VigorAP 910C User’s Guide
149
After finishing this web page configuration, please click OK to save the settings.
3
3
.
.
1
1
0
0
.
.
3
3
A
A
c
c
c
c
e
e
s
s
s
s
C
C
o
o
n
n
t
t
r
r
o
o
l
l
For additional security of wireless access, the Access Control facility allows you to restrict
the network access right by controlling the wireless LAN MAC address of client. Only the
valid MAC address that has been configured can access the wireless LAN interface. By
clicking the Access Control, a new web page will appear, as depicted below, so that you
could edit the clients' MAC addresses to control their access rights (deny or allow).
Available settings are explained as follows:
Item Description
Policy
Select to enable any one of the following policy or disable the
policy. Choose Activate MAC address filter to type in the
MAC addresses for other clients in the network manually.
Choose Blocked MAC address filter, so that all of the devices
with the MAC addresses listed on the MAC Address Filter
table will be blocked and cannot access into VigorAP 910C.
MAC Address Filter
Display all MAC addresses that are edited before.
Client’s MAC
Address
Manually enter the MAC address of wireless client.
Add
Add a new MAC address into the list.
Delete
Delete the selected MAC address in the list.
Edit
Edit the selected MAC address in the list.

Draytek VigorAP 910C Specifications

General

Brand	Draytek
Model	VigorAP 910C
Category	Wireless Access Point
Language	English