VigorAP 800 User’s Guide
24
3
3
.
.
1
1
O
O
p
p
e
e
r
r
a
a
t
t
i
i
o
o
n
n
M
M
o
o
d
d
e
e
This page provides several available modes for you to choose for different conditions. Click
any one of them and click OK. The system will configure the required settings
automatically.
AP
This mode allows wireless clients to connect to access point and
exchange data with the devices connected to the wired network.
Station-Infrastructure
Enable the Ethernet device such as TV and Game player
connected to the VigorAP 800 to an access point.
AP Bridge-Point to
Point
This mode can establish wireless connection with another
VigorAP 800 using the same mode, and link the wired network
which these two VigorAP 800s connected together. Only one
access point can be connected in this mode.
AP Bridge-Point to
Multi-Point
This mode can establish wireless connection with other VigorAP
800s using the same mode, and link the wired network which
these VigorAP 800s connected together. Up to 4 access points
can be connected in this mode.
AP Bridge-WDS
This mode is similar to AP Bridge to Multi-Point, but access
point is not work in bridge-dedicated mode, and will be able to
accept wireless clients while the access point is working as a
wireless bridge.
Universal Repeater
This product can act as a wireless range extender that will help
you to extend the networking wirelessly. The access point can act
as Station and AP at the same time. It can use Station function to
connect to a Root AP and use AP function to service all wireless
clients within its coverage.
To Next Page
Loading...
Need help?
General
