VigorAP 800 User’s Guide
90
On – Choose the interface (LAN-A or LAN-B) for VigorAP 800
connecting to ACS server.
Port – Sometimes, port conflict might be occurred. To solve such
problem, you might change port number for CPE.
Periodic Inform
Settings
The default setting is Enable. Please set interval time or schedule
time for the AP to send notification to CPE. Or click Disable to
close the mechanism of notification.
Interval Time – Type the value for the interval time setting. The
unit is “second”.
STUN Settings
The default is Disable. If you click Enable, please type the
relational settings listed below:
Server Address – Type the IP address of the STUN server.
Server Port – Type the port number of the STUN server.
Minimum Keep Alive Period – If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number as
the minimum period. The default setting is “60 seconds”.
Maximum Keep Alive Period – If STUN is enabled, the CPE
must send binding request to the server for the purpose of
maintaining the binding in the Gateway. Please type a number as
the maximum period. A value of “-1” indicates that no maximum
period is specified.
3
3
.
.
1
1
1
1
.
.
3
3
A
A
d
d
m
m
i
i
n
n
i
i
s
s
t
t
r
r
a
a
t
t
o
o
r
r
P
P
a
a
s
s
s
s
w
w
o
o
r
r
d
d
This page allows you to set new password.
Account
Type the name for accessing into Web User Interface.
Password
Type in new password in this filed.
When you click OK, the login window will appear. Please use the new password to access
into the web user interface again.
To Next Page
Loading...
Need help?
General
