Draytek VigorAP 902 Quick Start Guide

Interface
Description
0/1
Power switch.
PWR: Connecter for a power adapter.
LAN B
Connecter for xDSL / Cable modem (Giga level)
or router.
LAN A4,
A2, A1
A3 (PoE)
Connecter for xDSL / Cable modem (Giga level) /
computer or router.
LAN A3 is used for PoE connection (for indoor
use).
WLAN
ON/OFF
WPS
Wireless band will be switched /changed
according to the button pressed and released. For
example,
 2.4G (On) and 5G (On) – in default.
 2.4G (Off) and 5G (On) – pressed and released
the button once.
 2.4G (On) and 5G (Off) – pressed and released
the button twice.
 2.4G (Off) and 5G (Off) – pressed and released
the button three times.
WPS - When WPS function is enabled by web
user interface, press this button for more than 2
seconds. The router will wait for any wireless
client connecting to it through WPS.
USB
Connecter for a USB device (for temperature
sensor).
Restore the default settings. Usage: Turn on the
router. Press the button and keep for more than 10
seconds. Then the router will restart with the
factory default configuration.
Note
For the sake of security, make the accessory kit away from
children.

Draytek VigorAP 902 Specifications

General

Brand	Draytek
Model	VigorAP 902
Category	Wireless Access Point
Language	English