Dream-Flight Libelle - Table of Contents

TABLE OF CONTENTS
Pg. Topic
1 Kit Contents
2 Items Required for Completion (not included)
3 Radio Gear Setup
5 Wing Assembly
10 Fuselage and Tail Assembly
15 Wing Installation
16 Balancing the Libelle: CG Position
17 Control Surface Deflections
18 Pre-Flight Check
19 Test Flights: Trimming for Straight and Level Flight
20 Programming Mixes: from Launch to Thermal
Using Flaps via Flaperons
Active Camber Control via Elevator-Flap Mixing
21 Discus Launch Technique
23 Fine-Tuning CG Position
24 “Urban Soaring” Technique
Background
Important guidelines to follow when flying the Libelle
Slope Soaring
Flatland Soaring
To familiarize yourself with the assembly process, we recommend
reading over this manual before proceeding with final assembly.
When assembling your Libelle, make sure to check
out the HOT TIPS found throughout this manual!