uncleaned one, but it is not repeating the work.
13. How to deal with device errors of Dreame L10Pro?
A : Press the Power/Clean button and hold for 6 seconds to restart.
14. Why is the scheduled clean not working?
A: It might be caused by low battery level. The scheduled clean only works when the battery
level is greater than 15%.
15. *Why does the machine start itself automatically?
A：
1. Check if the scheduled clean is turned on
2. The robot vacuum may retreat from and reconnect to the charging base due to accidental
manual contact that causes the electric pole disconnection.
3. Please check if the cable of the charging base is connected properly. If it is loose, the base
will fail to provide power to the robot vacuum and cause it to retreat and try to find new
power source.
4. If the control of the robot vacuum is shared with others, make sure others are not operating
it at the same time.
16. Why does L10Pro fail to resume cleaning after recharging
itself？
A： Make sure the L10Pro is not working in DND period. If you actively command it to
return or manually move it back to the dock, L10Pro will not resume cleaning either.
To Next Page
Loading...