17. Does Dreame L10Pro have a motor overload protection?
A：Yes. Dreame L10Pro has overload protection for all motors on-board, including the
suction module, main brush, side brush, and main driving wheel. Motor overload protection is
on once the robot is severely clogged with debris or foreign matters.
18. Does Dreame L10Pro have any consumables that need to be
replaced regularly?
A：
It is recommended to clean every week and replace the main brush
every 6-12 months for a better cleaning result.
It is recommended to clean every week and replace the filter
every 3-6 months
It is recommended to clean every week and replace the main
brush every 3-6 months for a better cleaning result.
Remove the mop after cleaning, in case the sewage backfills
the water tank and clog the outlet; Dirty mop will affect the
mopping result. Please clean it before use. It is recommended to
replace the mop every 3-6 months for a
better cleaning result.
Three. Installation and Maintenance
1. How to use the dock?
A：Place the dock against the wall on level floor, and keep a space of more than
0.5 meters on both sides of the dock. Connect the plug to a power socket. For
To Next Page
Loading...