Dream Bot L10 Pro - 10. What should I do if the L10 Pro fails to charge; 11.What should I do if the water tank fails to dispen; 12.What should I do if the top cover of the water tan; 13.Why does L10 Pro keep trying to connect after retur

Users can adjust the water level based on the types of cleaning. If the water level is at its
maximum, water stains might be left on the floor.
10. What should I do if the L10Pro fails to charge?
A : Please clean the charging interface of the dock and the robot if there is any dust
on it, as dust may result in charging failure.
11. What should I do if the water tank fails to dispense water or
only dispense very small amount of water?
A : Check if the water tank is filled with enough water. Install the mopping pad properly and
wash the mopping pad regularly. Meanwhile, make sure to wet the mopping pad before the
cleaning.
12. What should I do if the top cover of the water tank leaks?
A : Check if the water tank is filled with enough water. Install the mopping pad properly and
wash the mopping pad regularly. Meanwhile, make sure to wet the mopping pad before the
cleaning.
13. Why does L10Pro keep trying to connect after returning to
the dock?
A : Please check whether the dock and the charging pad of the L10Pro are stained with dust.
L10Pro will repeat docking in this situation. Please wipe off the dust before use.