53 54
EN EN
1. Press the handvac release button to remove the handvac.
2. Install the dust cup assembly and other attachments as shown in the diagram until
you hear a click.
3.
mode switch
to switch between Standard mode and Turbo mode according to your
needs.
How to Use
One-Touch Self-Cleaning
* The self-cleaning function can be enabled only when the appliance is being charged and the battery level is more
1. After the appliance completes the cleaning task, place it back onto the base and
2. on the top of the handle. The self-cleaning
3. After self-cleaning is complete, promptly clean the Used Water Tank. If some stains
are left on the charging base, clean the base.
How to Use
1
2
Click
Click
To Next Page
Loading...
Need help?
General
