51 52
EN EN
Auto Mode
Suction Mode
If Suction mode is selected, the appliance will vacuum water only and the
brush roller will not be dampened. No water is coming out of the Clean
Water Tank.
Standard Mode (Handvac)
When the appliance converts to a handheld vacuum, it is powered on by
default in Standard mode.
Turbo Mode (Handvac)
Press the handvac mode switch to select the Turbo mode.
1. Fill the Clean Water Tank: Press the Clean Water Tank release button to remove the
Tank and ensure it clicks into place.
Note:
•
For better cleaning performance, it is recommended to add 10ml detergent with the bottle cap into the full Clean
Water Tank, then shake gently and evenly for use.
•
1
2
2. Start cleaning: Gently step on the brush cover and recline the appliance backwards.
Press the Power Switch
to start operating, press the Mode Switch tto switch
between the Auto mode and the Suction mode according to your needs.
3. Empty the Used Water Tank: Press the Used Water Tank release button to take out the
tank. Remove the tank cover and pour out the used water. Close the tank cover and re-
install the tank before use.
Note:
Do not vacuum any foamy liquids.
If the appliance is in the upright position while working, the current task will be suspended.
1
2
How to Use How to Use
Working Modes
To Next Page
Loading...
Need help?
General
