Dreame P10 Pro User Manual

9
ENEN
How to Use
Working Methods
Select from two working methods for the vacuum, based on your needs.
Method 1: Discontinuous Cleaning Mode
Press and hold the on/o󽗈 switch to power it on, and release it to stop immediately.
Method 2: Continuous Cleaning Mode (Electronic Lock)
Click the button to switch to Continuous Cleaning Mode and the button is on. Then
release the on/o󽗈 switch to make the vacuum in Continuous Cleaning Mode.
Use the electronic lock to free your 󽗉ngers and avoid 󽗉nger fatigue caused by holding the
switch.
Notes:
• In this mode, brie󽗊y press the switch to suspend the operation or start again，and the
working mode of the vacuum will not change.
• Click the electronic lock again to quit the Continuous Cleaning Mode.

Dreame P10 Pro Specifications

General

Motor power	410 W
Cleaning type	Dry
Vacuum air filtering	-
Suitable for all types of surface	Yes
Brush shape	Rectangular
Display type	LED
Product color	Gold, White
Dust container type	Bagless
Power source	Battery
Charging time	3 h
Suction power	130 AW
Battery voltage	- V
Battery capacity	2.5 Ah
Number of batteries supported	7
Vacuum brushes included	Roller brush

Weight and Dimensions

Weight	1630 g