11
ENEN
Care & Maintenance
Tips:
1. Always use genuine parts to keep your warranty from being void.
2. If the vacuum is not used for an extended period, fully charge it, unplug its charger, and
store it in a cool, low-humidity environment away from direct sunlight. To avoid over-
discharging the battery, recharge the vacuum at least once every three months.
Cleaning the Vacuum
Wipe the vacuum with a soft dry cloth.
Cleaning the Dust Bin & Pre-Filter
Before cleaning the dust bin, disconnect
the adapter and keep the vacuum's power
switch in the o position.
1. Press the dust bin release button and
hold the dust bin to remove form the
vacuum in the direction of the arrow .
2. Empty the bin.
Note: It is recommended to clean the dust
bin after use.
Method 1: Press the release button on the
bottom of the bin.
Method 2: Hold the upper cover of dust bin,
then remove the cyclone assembly.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
