Dreame P10 Pro User Manual

14
ENEN
Care & Maintenance
Cleaning the Filter
It is recommended to clean the 󽗉lter once every 4 to 6 months.
1. Remove the dust cup as shown in the
󽗉gure.
3. Clean the 󽗉lter with clean water. Make
sure you rotate the 󽗉lter 360° to thoroughly
and remove all dust caught in the 󽗉lter.
Lightly tap the 󽗉lter several times to remove
any excess dirt.
2. Remove the 󽗉lter from the vacuum by
pulling it down in the direction shown in the
󽗉gure.
4. Allow the 󽗉lter to air dry for 24 hours.
Note:
• Only use clean water to wash the 󽗉lter. Do not use detergent.
• Do not attempt to clean the 󽗉lter with a brush or 󽗉nger.
12
6
111
57
210
48
9 3
24 hrs

Dreame P10 Pro Specifications

General

Motor power	410 W
Cleaning type	Dry
Vacuum air filtering	-
Suitable for all types of surface	Yes
Brush shape	Rectangular
Display type	LED
Product color	Gold, White
Dust container type	Bagless
Power source	Battery
Charging time	3 h
Suction power	130 AW
Battery voltage	- V
Battery capacity	2.5 Ah
Number of batteries supported	7
Vacuum brushes included	Roller brush

Weight and Dimensions

Weight	1630 g