Dreame R10 - Cleaning the Multi-Surface Brush

16
EN
Cleaning the Multi-Surface Brush
1. Turn the lock counterclockwise until it
stops, then remove the roller from the roller
brush.
2.Usescissorstocuto󽗈thehairsand
󽗉bersthatgetstuckonthebrushroller.
Wipethedustfromthenotchand
transparentcoverwithadryclothorpaper
towel.Thoroughlydrybeforeuse.
3. When it is dirty, rinse the brush roller
with clean water until it is clean.
4. Stand the brush roller upright for at least
24 hours until it is fully dry.
Care&Maintenance
12
6
111
57
210
48
39
24 hrs