18 19
ENEN
Clean the Charging Contacts and Auto-empty Vents
Routine Maintenance
Replace the Dust Collection Bag
Routine Maintenance
According to the status indicator (blinking orange) and app prompts, replace the dust collection bag with a new one when it is full.
1. Discard the dust collection bag. 3. Install a new dust collection bag.
2. Wipe the filter with a dry cloth.
4. Close the upper cover of auto-empty base.
Note: When taking out the collection bag, close the bag handle to avoid dust
leaking out.
Note: Do not close the base forcefully if the upper cover cannot be closed or
the dust collection bag is not installed.
Clean the LDS Laser
Sensor
Clean the AI Visual Sensor
Clean the Cli Sensor
Note: Wet cloths can damage sensitive elements within the robot and base. Please use dry rags for cleaning.
To Next Page
Loading...
Need help?
General
