Dreame RLX41CE User Manual (English)

Other manuals for Dreame RLX41CE

Questions and Answers:

H
Heather JimenezAug 22, 2025
Why my Dreame Vacuum Cleaner robot fails to connect to Wi-Fi?
- L
  Lindsey RoachAug 22, 2025
  If your Dreame Vacuum Cleaner robot isn't connecting to Wi-Fi, first ensure you're using the correct Wi-Fi password. Then, verify that your robot is connected to a 2.4 GHz Wi-Fi network, as it doesn't support 5 GHz connections. A weak Wi-Fi signal can also cause connection problems, so place the robot in an area with good coverage. Finally, try exiting and re-entering the app to reattempt the configuration.
M
Michael RosalesSep 1, 2025
Why does Dreame RLX41CE noise increase?
- D
  Debra GarciaSep 2, 2025
  An increase in noise while your Dreame Vacuum Cleaner is operating can be due to several factors. The dust box filter may be clogged, so clean or replace it. A hard object may be caught in the main brush or the dust box; check and remove any such objects. The main brush or side brush may also be tangled, so check for and remove any foreign objects. Also, switch the suction mode to Standard or Quiet.
S
stricklandsusanAug 31, 2025
What to do if Dreame RLX41CE Vacuum Cleaner gets stuck in front of the base station?
- L
  Lori WardAug 31, 2025
  If your Dreame Vacuum Cleaner gets stuck in front of the base station, clear any obstructions within 5 cm on the left and right sides or within 1.5 m in front of the base station. If the floor in front of the base station is overly wet, clean the excess water. Moving the base station to a different place may also resolve the issue.
A
Amy GarciaAug 30, 2025
Why Dreame Vacuum Cleaner cannot find base station?
- A
  Alexander FloresAug 30, 2025
  If your Dreame Vacuum Cleaner can't find or return to the base station, make sure the base station is connected to power and hasn't been moved while the robot was away. If it was moved, place the robot onto the base station to charge. Too many obstructions around the base station can also cause issues, so place the base station in a more open area. If the robot is too far, manually place it on the base station. Also, wipe the signaling area on the base station to remove dust or debris.
S
Scott WilliamsAug 29, 2025
What to do if Dreame Vacuum Cleaner fails to connect to Wi-Fi?
- E
  Edward RamirezAug 29, 2025
  If your Dreame Vacuum Cleaner can't connect to Wi-Fi, first ensure the Wi-Fi password is correct. Also, verify that the robot is connected to a 2.4 GHz Wi-Fi network, as it does not support 5 GHz connections. A weak Wi-Fi signal can also be the cause, so place the robot in an area with good coverage. If the issue persists, exit and re-enter the app, then try again.
T
tinagayAug 27, 2025
Why Dreame RLX41CE Vacuum Cleaner won't turn on?
- B
  Brandi SmithAug 27, 2025
  Your Dreame Vacuum Cleaner might not be turning on because the battery is low. Try recharging the robot on the base. If that doesn't work, the battery temperature may be too low or too high. Ensure the appliance is operated between 32°F (0°C) and 104°F (40°C).
T
timothy72Aug 27, 2025
What to do if Dreame Vacuum Cleaner robot will not charge?
- P
  Paul RiosAug 27, 2025
  If your Dreame Vacuum Cleaner robot isn't charging, start by checking that the base station is properly connected to a power source, ensuring both ends of the power cord are securely plugged in. Next, inspect the charging contacts on both the base station and the robot and clean them if necessary. Also, check for any foreign objects at the connector of the robot and remove them.
M
Miguel JosephAug 25, 2025
How to fix a Dreame RLX41CE that will not turn on?
- D
  davidhernandezAug 26, 2025
  If your Dreame Vacuum Cleaner robot won't turn on, it's likely due to a low battery. Recharge the robot on its base and try again. Also, ensure the battery temperature is within the recommended operating range of 32°F (0°C) to 104°F (40°C).
J
Jessica WilsonAug 23, 2025
What to do if Dreame Vacuum Cleaner won't charge?
- K
  Kelli AllenAug 25, 2025
  If your Dreame Vacuum Cleaner isn't charging, check that the base station is properly connected to power by ensuring both ends of the power cord are plugged in. Also, the charging contacts may have poor contact, so clean them. Finally, check for any foreign objects at the connector of the robot and remove them.

Dreame RLX41CE Specifications

General

Model Number	RLX41CE
Type	Robot Vacuum Cleaner
Battery Capacity	5200 mAh
Suction Power	4000 Pa
Navigation	LDS Laser Navigation
Mopping Function	Yes
Noise Level	65 dB
Connectivity	Wi-Fi