Dreame VTV97A - Installation

17 18
ENEN
2. After unlocking the motorized mini-brush,
remove the brush roller, then rinse and
clean it.
4. Once the brush roller is dry, reinstall it
by following the disassembly steps in
reverse.
Cleaning the Motorized Mini-Brush
1. Use a coin as illustrated to rotate the
lock counterclockwise until you hear a
click.
3. Stand the brush roller upright in a well-
ventilated area for at least 24 hours until
it is fully dry.
Care & Maintenance
3. When it is dirty, rinse the brush roller
with clean water until it is clean.
4. Stand the brush roller upright for at
least 24 hours until it is fully dry.
12
6
111
57
210
4
3
8
9
24 hrs
12
6
111
57
210
4
3
8
9
24 hrs
Care & Maintenance
4. Stand the brush roller upright for at
least 24 hours until it is fully dry.
3. When it is dirty, rinse the brush roller
with clean water until it is clean.
Cleaning the Soft Roller Brush
1. As shown in the picture, press the brush
roller release button to remove the
roller from the slot.
2. Use scissors to cut o󽗈 the hairs and
󽗉bers that get stuck on the brush roller
and the wheels. Wipe the dust from the
notch and transparent cover with a dry
cloth or paper towel. Thoroughly dry
before use.
12
6
111
57
210
4
3
8
9
24 hrs