Installation steps
6PRISM PLUS manual Ver 1 Rev 2 11/2016
Fig 1
Fig 2
outside
U-channel
outside
outside
outside
1 2
3
4
W1
W2
W1
W2
1. Starting from the bottom, measure from the
finished corner of the opening to the outside of
the Stainless Steel U-channels (#11) and draw
a plumb line up the wall according to the Glass
Box Code for the Shower Enclosure model size.
See Table 1 below.
2. Make sure the Stainless Steel U-channels (#11)
are absolutely vertical. Mark the position of the
Stainless Steel U-channels (#11) on the walls.
See Fig 2 for details
34"
36"
38"
40"
Glass Box Code
W1
34"
36"
38"
40"
W2
SHEN-GLP2601-343410
SHEN-GLP2601-363610
SHEN-GLP2601-383810
SHEN-GLP2601-404010
Table 1
NOTE: The Stainless Steel U-channels (#11)
must be installed at the correct dimensions
for the model size indicated in Table 1.
To Next Page
Loading...
