DREAMS Jay - Assembling the Slat Frame

Jay Ottoman Bed - Assembly guide - Page 9
5
6
r
x4
d
x1
n
x2
n
X
X
r
l
x4
b
x4
c
x4
l x2
c x2
b x2
CAUTION
To be operated by
ADULTS ONLY
.
Keep children and pets away from the storage area.
Avoid trapping your fingers by using the handle
to lift & lower the base.
Only lift when the mattress is in place.
Ensure the ottoman support bar is secure when the
base is open.
Regularly air the internal storage area and contents.
WARNING
TO AVOID ACCIDENTS
To access the storage area, the ottoman frame
MUST BE FULLY OPENED
and then
FULLY CLOSED afterwards.
!
Prepare the upper mattress base board (X).
90%
100%
q
x1
i
x4
b
x4
c
x4
X
c
b
i
q
TO THE SPACE BELOW!
Lay the base board
onto the support bars
carefully sliding the
studs through the
upper holes. Using
two nut sets on each
side (i, b & c),
connect the threaded
studs loosely to the
bars. Please do not
tighten 100% yet.
Fit the first base board (X) at the top of the support arms.
Fit four studs (r)
as shown
Fit the two metal connection
plates (n) to the edge of the board
(X)
using bolt sets (I, b & c).
Please do not tighten yet.