To Next PageTo Next Page
Need help?Do you have a question about the Dremel 200 and is the answer not in the manual?
General| Speed | Two speed |
|---|---|
| Voltage | 120V |
| Weight | 1.2 lbs |
| Power Source | Corded |
| Chuck Type | Collet |
| Collet Size | 1/8 inch |
| Cord Length | 6 feet |
| Amperage | 1.15 Amps |
| Length | 7.5 inches |
| No Load Speed | 15, 000 or 35, 000 RPM |
Guidelines for maintaining a safe and hazard-free work environment.
Precautions to prevent electric shock hazards.
Guidelines for operator safety and protective measures.
Safety guidelines for grinding, sanding, wire brushing, polishing, carving operations.
Specific safety precautions for kickback during operations.
Safety guidelines for using wire brushes on power tools.
