-10-
Feature Overview
CAR DVR MODE
This hands-o mode is ideal for insurance and security
purposes.
The camera records footage in a continuous loop style
(DVR Intervals) recording loop after loop until it fills the
MicroSD Card. Once full, the oldest loops will be deleted
as the newer ones are saved. The DVR loop interval can be
10s, 30s, 1min, 2min, 5min or 10min.
VIDEO TAGGING
When activated, this feature allows the camera to
continuously record video, but only save when important
footage is “Tagged”.
While recording video, pressing the button will save
past, present and future video. For example, with a video
tagging interval of 30s selected, the camera will save
the previous 30s, and an additional 30s – a total of 1m
CLONE MODE
Link two or more Ghost 4K+, Ghost XL, Ghost X or Ghost
4K cameras into a single network wirelessly controlled by
one master camera. To set up clone mode:
-Navigate to the ‘Clone Mode’ option in the settings
menu, and press the button to select.
-Select the ‘master’ option, and press the button to
select. The master camera is now set up.
-On a second camera repeat the above, selecting the
‘slave’ option.
-Repeat for each additional slave camera.
-The master camera can now be used to wirelessly start
and stop recordings, change settings and change modes
on the entire group of cameras.
To Next Page
Loading...
Need help?
General
