Drill Master 350x - General Safety Rules

4
www.drilldoctor.com
General Safety Rules
⚠WARNING! When using electric tools, basic safety
precautions should always be followed to reduce the
risk of fire, electric shock and personal injury. Read all
these instructions before attempting to operate this
product and save these instructions.
⚠WARNING! CHOKING HAZARD!
Small Parts – Not for children under 3-yrs.
Installation/Assembly
Carefully unpack the power tool and set it on the table. Check to
see that no damage has occurred in shipment. Check all packing
materials to be sure that all parts are present. See the section in
this User’s Guide for part identication diagram.
The Drill Doctor
®
is completely assembled.
⚠WARNING! Connect to properly wired (115V or 230V, as
applicable) outlet, or electrical shock may occur.
1. Work Area Safety:
a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control. Do
not let persons not involved in the work touch the tool or
power cord.
d) Make workshop kid proof with padlocks, master switches
or by removing starter keys.
e) Securely place this tool on your workbench during use.
2. Electrical Safety:
⚠ DANGER! Electrical shock can kill! Read, understand and follow
ALL safety instructions.
⚠ WARNING! Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase the
risk of electric shock.
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodied
plugs and matching outlets will reduce risk of electric shock.