Drill Master 300 - User Manual

MODEL300
User’s Guide
Guía del usuario
Mode d’emploi
1. ALIGN BITS
3. SPLIT POINTS
2. SHARPEN BITS
<REPLACE IMAGE>
<REPLACE IMAGE>

Summary

Safety Precautions

Getting to Know Your Drill Doctor

Drill Bit Identification and Anatomy

Identifying Basic Drill Bits

Explains three common drill bit types: Standard Point, Split Point, and Masonry.

Anatomy of a Drill Bit

Details the parts of a drill bit: Chisel Edge, Cutting Edge, Heel, and Relief Angle.

The Drill Doctor Sharpening Process

Aligning the Drill Bit

Step-by-step guide on how to align a drill bit in the chuck for sharpening.

Sharpening the Drill Bit

Instructions on how to sharpen a drill bit using the Drill Doctor machine.

Identifying Correctly-Sharpened Drill Bits

Sharpening Bits of Different Lengths and Diameters

Aligning and Sharpening Masonry Drill Bits

Questions and Answers

Drill Doctor Maintenance Procedures

Removing the Wheel Access Cover

Procedure for removing the wheel access cover for maintenance.

Cleaning Your Drill Doctor

Instructions for cleaning the Drill Doctor machine after use.

Cleaning the Chuck

Detailed steps for cleaning the chuck component of the Drill Doctor.

Diamond Sharpening Wheel Management

Guides on when to replace the diamond sharpening wheel and how to do it.

User-Replaceable Parts

Drill Doctor Warranty Information

Drill Master 300 Specifications

General

Brand	Drill Master
Model	300
Category	Power Tool
Language	English