Page 10 For technical questions, please call 1-800-444-3353. SKU 66965
When inserting or removing a screw or 6.
the screw driver bit in the head of the
screw or bolt and cause the screw or
bolt to thread into or unthread from the
material.
When drilling a hole, let the Drill do the
7.
work, using only enough pressure to
follow the drill as it cuts the hole in the
material.
8.
the Trigger Switch (18), and center the
Direction Selector (13) to lock the trigger
mechanism as a safety measure.
Remove the Battery Pack (11). 9.
Clean then store the Drill indoors and out 10.
of children’s reach.
To Next Page
Loading...
