EasyManua.ls Logo

Drill Master 66965 - Extension Cords

Drill Master 66965
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 6 For technical questions, please call 1-800-444-3353. SKU 66965
GROUNDING
Improperly connecting
the grounding wire can
result in electric shock.
Check with a qualied electrician
if you are in doubt as to whether
the outlet is properly grounded.
Do not modify the power cord
plug provided with the Charger.
Do not use the Charger if the
power cord or plug is damaged.
If damaged, have it repaired by a
service facility before use. If the
plug will not t the outlet, have
a proper outlet installed by a
qualied electrician.
Double Insulated Chargers:
Chargers with Two Prong Plugs
Outlets for 2-Prong Plug
Chargers marked “Double Insulated” 1.
do not require grounding. They have
a special double insulation system

complies with the applicable standards

Canadian Standard Association, and the
National Electrical Code.
(See Outlets for 2-Prong Plug.)
Double insulated chargers may be used 2.
in either of the 120 volt outlets shown in
the preceding illustration. (See Outlets
for 2-Prong Plug.)
Extension Cords
Note: Extension cords must not be used with
this item’s charger.
Symbology
Double Insulated
Canadian Standards Association

V~
Volts Alternating Current
A
Amperes
n
0
xxxx/min.

(RPM)

Related product manuals