Drive 15561 - PRODUCT AND HANDLING SYMBOLS

2
Symbols Description Symbols Description
Type BF applied part equipment.
IEC 60601-2-52: The applied part includes all
parts of the medical bed that are within reach
of the patient, even if they are underneath
the mattress support surface. Applied parts
list: Mattress, Bed frame, Side Rail, Head
Board and Foot Board, Mattress retainer.
Recycle the item in accor-
dance with local regulations.
According to IEC 60529. Rating for dust-
protection and identied as equipment that is
protected against splashing water.
IEC 60601-2-52
IEC 60601-1
IEC 60601-1-2
IEC6060-1-1-11
A product bearing the IEC
listed Mark is determined
to have met the minimum
requirements of prescribed
product safety standards.
Class II equipment
The owner’s manual needs to be read before
operating the bed.
Maximum patient weight and
safe working load
PRODUCT SYMBOLS
PRODUCT HANDLING SYMBOLS
Do not remove motor cover or repair yourself. Contact
your local Provider or Dealer for technical assistance.
Do not stack more than 5 cartons high
Do not step
Keep Dry
Do not exceed 104 degrees F
Do not leave in direct sun light for extended period of
time
Handle with care
IPX4
5
40
o
C
104
o
F