3130
Tire pressure and maintenance
Tire pressure maintenance must always be conducted by an adult.
Checking tire pressure:
BEFORE using the product, always check to see that the tires are in place,
properly affixed, and properly inflated to the designated PSI. (The PSI is located
on the wall of each tire.)
It’s important to always check the tire pressure level, as it may fluctuate over time
depending on frequency of use, weather, and lower air pressure.
Tire pressure and maintenance (continued)
Tire inflation / deflation:
Do NOT use pressure air supplies found at gasoline stations when inflating/deflating the tires,
as they are not designed for this product.
To inflate each tire (if the pressure level is too low):
• Remove the tire valve cap.
• Use a standard bicycle tire air pump (not included) to connect to the tire valve.
• Follow tire pump instructions to properly inflate the tire to the designated PSI.
Be sure not to overinflate.
• Replace the tire valve cap.
To deflate each tire (if the pressure level is too high):
• Remove the tire valve cap.
• Use a standard bicycle tire air pump (not included) to connect to the tire valve.
• Follow tire pump instructions to properly deflate the tire to the designated PSI.
Be sure not to deflate too much.
• Replace the tire valve cap.
To Next Page
Loading...
General