EasyManua.ls Logo

DROYD Weeler - General Safety Precautions; Warranty Voiding Conditions

Default Icon
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
f.
1312
Getting to know your Weeler Packaging contents
The Weeler comes with the following items in the packaging box.
Please identify and locate all of the following prior to assembly:
1) Weeler electric rideable product
a. Pre-assembled frame
b. Handlebar (attached to frame but must be installed)
c. Brake lever (pre-installed on handlebar with 1 screw)
e. Ignition key(set of 2)
g. Kickstand (with 2 screws and 2 nuts pre-installed)
2)
Battery charger & charging cable
3)
Tool kit
b.4 mm allen wrench
e. 10 mm wrench
f. 13 mm wrench
g. Handlebar clamp top half (x 1)
h. Handlebar clamp top half screws (x 2)
i.
Handlebar clamp bottom half (x 1)
4)
User manual
Handlebar
Throttle twist control
Battery level indicator
Seat
Brake lever
Brake cable
Headlight switch
Frame
Front tire
Rear tire
Tire valve cap
Ignition key
Motor
Rear brake
Kickstand
Headlight
Footrests
Battery pack
Charging port
d. Speed limit key(set of 2)
f.Ignition cover (attached to frame but must be installed; cover has 2 screws and 2 nuts pre-installed)
a. 3 mm allen wrench
d. 7 mm wrench
Speed limit switch
j. Handlebar clamp bottom half screws (x 2)
k. Handlebar clamp bottom half washers (x 2)
l. Handlebar clamp bottom half nuts (x 2)
c. 5 mm allen wrench