Drucker Diagnostics 614B User Manual

Drucker Diagnostics 614B

16 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

614B

Operator’s Manual

P/N 03-0-0002-0040 Rev. G

Questions and Answers:

E
Elizabeth PatelAug 7, 2025
What to do if my Drucker Diagnostics 614B centrifuge does not run?
- Q
  qtaylorAug 7, 2025
  If your Drucker Diagnostics Laboratory Equipment centrifuge isn't running, begin by checking the electrical outlet and ensure the lid latch is fully turned clockwise to its stop position. Inspect the circuit breaker switch at the bottom left of the machine; if it's white, the breaker tripped – contact Drucker Diagnostics for assistance. If these steps don't resolve the issue, a technician should test and replace the circuit board if necessary.
R
Raymond ClarkAug 15, 2025
Why is my Drucker Diagnostics Laboratory Equipment making excessive noise?
- M
  Mary GarciaAug 15, 2025
  If your Drucker Diagnostics Laboratory Equipment is making excessive noise, first ensure the load is balanced. Also, check the rotor chamber for any foreign objects. Make sure the nut in the center of the rotor is tightened. If the issue persists, have a technician test the motor and replace it if needed.
M
Michael SullivanAug 26, 2025
How to fix a Drucker Diagnostics 614B rotor that does not spin freely?
- R
  Robert WilsonAug 26, 2025
  If the rotor of your Drucker Diagnostics Laboratory Equipment does not spin freely, first ensure nothing has fallen into the rotor chamber. If the issue remains, the rotor may be damaged, and you should contact Drucker Diagnostics for further assistance.

Drucker Diagnostics 614B Specifications

General

Brand	Drucker Diagnostics
Model	614B
Category	Laboratory Equipment
Language	English

Summary

Model Description

Intended Use

Specifies the general purpose laboratory use for density-based fluid separation via centripetal acceleration.

Supplied Equipment

Features

Highlights key design aspects like the fixed-angle rotor, cooling system, steel construction, and safety switch.

Warranty

Details the manufacturer's warranty period for defects in workmanship and parts.

General Specifications

Setup Location

Outlines criteria for choosing a safe and functional location, including clearance, ventilation, and surface requirements.

Initial Setup Procedure

Operation

Spinning Balanced Loads

Explains the rules and importance of loading the rotor with balanced loads for optimal performance and longevity.

Rotor Removal and Installation

Care and Preventative Maintenance

Tube Holder Replacement

Recommends replacing tube holders every 24 months and inspecting them for cracks.

Cleaning and Disinfection

Troubleshooting

Calibration Testing

Safety

Covers safety standards and specific features like the lid safety switch and circuit breaker.

Replacement Parts

Available Accessories

Shows images and part numbers for optional accessories like tube cushions, shield caps, and platforms.

Related product manuals

Preview: Drucker Diagnostics 642E

Drucker Diagnostics 642E

Preview: Drucker Diagnostics 642VES

Drucker Diagnostics 642VES

Drucker Diagnostics 642VFD-Plus