Drucker Diagnostics QBC STAR - Page 53

6000-300-000 7–3
7 – Troubleshooting
207
Centrifuge motor prole error
during Power On Self-Test (POST)
1. Record the error message displayed on the LCD screen
2. Export the support le (Ref. page 2-8)
3. Power down the instrument (Ref. page 4-10)
4. Reset the power pack (Ref. page 7-1)
5. Turn the instrument Power on (Ref. page 4-2)
6. If the error persists contact Technical Support
209
Centrifuge motor prole error
during operation
1. Record the error message displayed on the LCD screen
2. Export the support le (Ref. page 2-8)
3. Power down the instrument (Ref. page 4-10)
4. Reset the power pack (Ref. page 7-1)
5. Turn the instrument Power on (Ref. page 4-2)
6. If the error persists contact Technical Support
210
Centrifuge control board/main
board communication error
1. Record the error message displayed on the LCD screen
2. Export the support le (Ref. page 2-8)
3. Power down the instrument (Ref. page 4-10)
4. Turn the instrument Power on (Ref. page 4-2)
5. If the error persists contact Technical Support
211
Centrifuge motor failure to
respond to system commands
error
1. Record the error message displayed on the LCD screen
2. Export the support le (Ref. page 2-8)
3. Power down the instrument (Ref. page 4-10)
4. Turn the instrument Power on (Ref. page 4-2)
5. If the error persists contact Technical Support
216 Centrifuge motor initialization error
1. Record the error message displayed on the LCD screen
2. Export the support le (Ref. page 2-8)
3. Power down the instrument (Ref. page 4-10)
4. Turn the instrument Power on (Ref. page 4-2)
5. If the error persists contact Technical Support
217 Centrifuge motor index error
1. Record the error message displayed on the LCD screen
2. Export the support le (Ref. page 2-8)
3. Power down the instrument (Ref. page 4-10)
4. Reset the power pack (Ref. page 7-1)
5. Turn the instrument Power on (Ref. page 4-2)
6. If the error persists contact Technical Support
218 Centrifuge motor position error
1. Record the error message displayed on the LCD screen
2. Export the support le (Ref. page 2-8)
3. Power down the instrument (Ref. page 4-10)
4. Reset the power pack (Ref. page 7-1)
5. Turn the instrument Power on (Ref. page 4-2)
6. If the error persists contact Technical Support
220 Centrifuge motor not enabled error
1. Record the error message displayed on the LCD screen
2. Export the support le (Ref. page 2-8)
3. Power down the instrument (Ref. page 4-10)
4. Turn the instrument Power on (Ref. page 4-2)
5. If the error persists contact Technical Support
221 Centrifuge motor is disabled error
1. Record the error message displayed on the LCD screen
2. Export the support le (Ref. page 2-8)
3. Power down the instrument (Ref. page 4-10)
4. Turn the instrument Power on (Ref. page 4-2)
5. If the error persists contact Technical Support
222
Centrifuge motor deceleration
error
1. Record the error message displayed on the LCD screen
2. Export the support le (Ref. page 2-8)
3. Power down the instrument (Ref. page 4-10)
4. Turn the instrument Power on (Ref. page 4-2)
5. If the error persists contact Technical Support