To Next PageTo Next Page
Need help?Do you have a question about the DS PC Series and is the answer not in the manual?
General| Brand | DS |
|---|---|
| Model | PC Series |
| Category | Transducer |
| Language | English |
Details the installation procedure for the standard PCS model transducer.
Information regarding the required power supply for the transducer operation.
Procedure for calibrating the transducer using the built-in push buttons.
Defines the user's responsibility concerning the safe and correct use of the transducer.
Specifies the materials used in the construction of the transducer probe and head.
Overview of the various types of magnetic cursors available for the transducers.
Details magnetic ring cursors with radial magnetic field configuration.
Describes toroidal cursors featuring axial magnetic field orientation.
Provides guidance and recommendations for the proper installation of floats.
Details the correct procedure for connecting the transducer's power supply.
Description of the green LED status and its meaning during operation.
Information on the yellow LED for indicating transducer working status and errors.
Defines the format and structure of command messages for transducer communication.
Details the command used to modify or designate the transducer identity (ID).
Information on the test center and the list of tests performed for CE mark approval.
