To Next PageTo Next PageWhat does it mean when the yellow LED on my DSC 3G2060 flashes 11 times?
If the yellow LED on your DSC Cell Phone flashes 11 times, the LEDs will flash when a remote firmware upgrade is in progress over Ethernet or cellular. The LEDs will extinguish when the update is complete.
What does it mean when the yellow LED on my DSC Cell Phone flashes 12 times?
If the yellow LED on your DSC Cell Phone flashes 12 times, this indicates that Section [021] System Account Code or Section [101]; [111]; [201]; and [211] Receiver Account Code have not been programmed. Ensure that a valid account code has been entered in these Sections.
General| Network | GSM 900 / 1800 / 1900 |
|---|---|
| Memory | 1MB |
| Stand-by | Up to 200 h |
| Talk time | Up to 3 h |
| Colors | Black |
Essential warnings for installers regarding product operation, limitations, and potential hazards.
Guidance on manual use, general safety, and important notes for installers.
Details on different communicator models (3G2060, TL2603G, TL260) and their features.
Information on which panels are compatible with the listed communicators.
Key features of the 3G Alarm Communicator, including encryption and connectivity options.
Technical specifications detailing cellular frequency bands for various global markets.
Steps for configuring remote programming using DLS 5 software via SMS.
Guidelines for installing the CAT 5 Ethernet cable for TL2603G/TL260 models.
Procedure for inserting and removing the SIM card from the communicator module.
Instructions for assembling the mounting bracket for the communicator.
Steps for connecting the communicator to the panel via PC-LINK and antenna.
Wiring instructions for powering the communicator module from the panel.
Wiring details for connecting an optional external bell or siren.
Connecting the keybus and network cables to the communicator and panel.
Procedure for initial power-up and observing communicator status LEDs.
Steps to ensure optimal cellular signal strength by testing antenna location.
Explanation of keypad display formats and access methods for programming.
Required panel programming sections and options for communicator integration.
Programming the account number, central station phone numbers, and communication format.
Explanation of the yellow trouble LED and its flash codes for diagnosing issues.
Detailed descriptions of various trouble conditions indicated by LED flashes.
Meaning of the red network connection status LED for Ethernet/TL260.
Steps to reset the communicator programming to factory default settings.
Information on how to update the device firmware via cellular or Ethernet.
Table detailing trouble indications, possible causes, and solutions based on LED status.
Configuration settings for IP addresses, subnet masks, gateways, and supervision intervals.
Configuration of receiver supervision, primary path, and enabling/disabling receivers.
Settings for DNS server IP addresses and the DLS incoming port for remote access.
Configuration for DLS outgoing port and account codes for event transmission.
Setting the communications format (CID/SIA) and defining reporting codes for events.
Configuring the time and cycle for Ethernet test transmissions.
Setting the account code, DNIS, and IP address for Ethernet Receiver 1.
Configuring the remote and local ports for Ethernet Receiver 1.
Setting the account code, DNIS, and IP address for Ethernet Receiver 2.
Configuring the remote and local ports for Ethernet Receiver 2.
Configuring the time and cycle for Ethernet test transmissions.
Setting the account code, DNIS, and IP address for Cellular Receiver 1.
Configuring the port and APN for Cellular Receiver 1 connection.
Configuring the APN and domain name for Cellular Receiver 1 connection.
Settings for Cellular Receiver 2 account, DNIS, address, port, APN, and domain.
Configuration for cellular public APN, login credentials.
Configuring cellular test transmission cycles and trouble delay settings.
Displaying language version, DNS, Ethernet, and Cellular IP addresses.
Displaying firmware version, SIM card details, IMEI, and MAC address.
Procedures for resetting the communicator to software defaults or performing a hard reset.
Interpreting diagnostic codes related to firmware update processes.
Understanding the 6-digit hexadecimal status code and its components.
Interpreting signal strength indicators and troubleshooting weak signals.
Interpreting the network indicator values (OFF, ON, Flashing).
Mapping trouble indicators to specific causes and troubleshooting steps.
Understanding the 8-digit status code for radio communication initialization.
Detailed breakdown of each bit's meaning in the radio initialization status code.
Worksheets for system options, network settings, and DNS server configuration.
Worksheet for configuring Ethernet receivers 1 and 2, and Ethernet test transmission.
Worksheet for configuring Cellular Receiver 1 settings.
Worksheet for configuring Cellular Receiver 2 and general cellular options.
Worksheet for configuring event notifications and SMS telephone numbers.
Worksheet for configuring toggle options for SMS notifications per telephone number.
Worksheet for programming labels for areas, systems, and partitions.
Worksheet for programming custom labels for up to 40 users.
Worksheet for programming custom labels for up to 51 zones.
Worksheet for programming custom labels for various external alarm and trouble events.
Worksheet for programming custom labels for internal events.
Worksheet for configuring SMS interactive functions and responses.
Worksheet for programming labels for SMS interactive responses.
Worksheet section for viewing system information like IP addresses and firmware versions.
Worksheet for configuring diagnostic test transmissions to receivers.
Worksheet for configuring system reset defaults, including software defaults.
Legal terms regarding software installation, use, backup, and limitations on reverse engineering.
Details of the limited warranty, including coverage, exclusions, and repair procedures.
Specific programming settings required for EN50131-1 certified installations.
Information on product conformance to EN50131-1 standards for radiated emissions and security levels.
