DSC GSM0110

6
Programming Worksheets
[000] Keypad Programming
1. Enter [
✱
][8][Installer’s code]
2. Enter [000] to go to keypad programming
[0] Keypad Enrollment
Valid entries are 01-18; e.g. enter [11] for partition 1, slot 1.
1st digit Enter 0 for Global Keypad
Enter 1 for Partition 1 Keypad
Enter 2 for Partition 2 Keypad
Enter 3 for Partition 3 Keypad
Enter 4 for Partition 4 Keypad
Enter 5 for Partition 5 Keypad
Enter 6 for Partition 6 Keypad
Enter 7 for Partition 7 Keypad
Enter 8 for Partition 8 Keypad
2nd digit Enter 1 to 8 for Slot Assignment
[1]-[4] Function Key Assignments
NOTE: To assign function keys, please refer to your System’s Installation Manual.
[6] LCD5511 Keypad Options
'HIDXOW
11
I_________I________|
>@.H\ >@.H\ >@.H\ >@.H\
Defaults: 03 04 06 11
Stay Away Chime [✱][5]
I________I________I I________I________I I________I________I I________I________I
'HIDXOW 2SWLRQ
ON
I________I
1
21= Local clock display enabled
2)) = Local clock display disabled
ON
I________I
2
21= Local clock displays AM/PM
2)) = Local clock displays 24 hour time
OFF
I________I
3
21= Open zones override clock display
2)) = Open zones do not override clock display
OFF
I________I
4
21= AC icon flashes on loss of power
2)) = AC icon not displayed on loss of power
OFF
I________I
5
21= Alarms not displayed while armed
2)) = Alarms always displayed while armed
ON
I________I
6
21= Door chime enabled for zone openings
2)) = Door chime disabled for zone openings
ON
I________I
7
21= Door chime enabled for zone closings
2)) = Door chime disabled for zone closings
OFF
I________I
8
21= ‘Z/P’ terminal is an output
2)) = ‘Z/P’ terminal is an input
alarm shop