Need help?Do you have a question about the DSC LC-151 and is the answer not in the manual?
General| Coverage | 15m x 15m (50ft x 50ft) |
|---|---|
| Detection Angle | 90° |
| Power Input | 9-16 VDC |
| Material | Plastic |
| Color | White |
| Tamper Switch | Normally Closed |
Lists core features including dual-tech detection, installation height, pet immunity, sensitivity adjustments, and protection.
Defines an intrusion as the crossing of both PIR and microwave detection beams, explaining alarm conditions.
Lists specific locations to avoid, such as facing direct sunlight, rapid temperature changes, or metal doors.
Instructs to install the detector to maximize side-to-side crossing of the detection area at the recommended height.
Details attaching the metal bracket to the wall, specifying clearance from edges for easy access and maintenance.
Explains the purpose and connection of each terminal for power, tamper, and alarm outputs.
Details adjusting PIR sensitivity via potentiometer and MW intensity via jumper for environmental conditions.
Provides a table correlating environment types with potentiometer and MW jumper positions for optimal performance.
Step-by-step instructions for performing a walk test to verify proper operation and coverage, including adjustments.
Details electrical, environmental, and physical specifications like frequency, power input, operating temperature, and dimensions.
To Next Page
