DSC LE2080 Installation Manual

Ethernet Cellular Programming
Worksheets
System Options
[001] Ethernet IP Address
Default (000.000.000.000)
[002] Ethernet IP Subnet Mask
Default (255.255.255.000)
[003] Ethernet Gateway IP Address
Default (000.000.000.000)
[004] Receiver Supervision Interval
Default (0087/135) Valid range: 0000 - FFFF.
[005] System Toggle Options
[1] Ethernet Receiver 1 Supervised (OFF).
[2] Cellular Receiver 1 Supervised (OFF).
[3] Supervision Type (OFF).
[4] Primary Communications Path.
[OFF] TL2803G(R)E; TL280LE(R)
[ON] 3G2080(R)E; LE2080(R).
[5] Redundant Communications (OFF).
[6] Remote Firmware Upgrade (ON).
[7] Alternate Test Transmission (OFF).
[8] Cellular Low Signal Trouble (OFF).
[006] System Toggle Options 2
[1] Ethernet Receiver 1 Enabled (ON).
[2] Ethernet Receiver 2 Enabled (ON).
[4] Cellular Receiver 1 Enabled (ON).
[5] Cellular Receiver 2 Enabled (ON).
[7] DLS Over Cellular (ON).
[8] Network Trouble Suppression (OFF).
[007] DNS Server IP 1
Default (000.000.000.000)
[008] DNS Server IP 2
Default (000.000.000.000)
[009] Language
Default (01); Program label language 01-29
OPT Language OPT Language OPT Language
01 English 11 Swedish 21 Russian
OPT Language OPT Language OPT Language
02 Spanish 12 Norwegian 22 Bulgarian
03 Portuguese 13 Danish 23 Latvian
04 French 14 Hebrew 24 Lithuanian
05 Italian 15 Greek 25 Ukrainian
06 Dutch 16 Turkish 26 Slovakian
07 Polish 17 Chinese 27 Serbian
08 Czech 18 Croatian 28 Estonian
09 Finnish 19 Hungarian 29 Slovenian
10 German 20 Romanian 30-99 Reserved
Programming Options
[010] System Toggle Options 3
[1] 2-Way Audio Over Cellular (OFF)
[2] Visual Verification Default (OFF).
[3] Video On Demand (OFF)
[011] Installer Code
Default (CAFE) Valid range: 0000 - FFFF.
[012] DLS Incoming Port
Default (0BF6/3062) Valid range: 0000 - FFFF.
[013] DLS Outgoing Port
Default (0BFA/3066) Valid range: 0000 - FFFF.
[015] DLS Call-Up IP
Default (000.000.000.000)
[016] DLS Call-Up Port
Default (0000) Valid range: 0000 - FFFF.
[020] Time Zone
Default (00) Valid range: 00 - 99.
[021] Account Code
Default (FFFFFF) Valid range: 000001 - FFFFFE.
[022] Communications Format
Default (04) Program 03 (CID), 04 (SIA).
[023] Panel Absent Trouble
Default (FF); Program 00 disable or FF enable.
[024] Panel Absent Trouble Restore
Default (FF) Program 00 disable or FF enable.
[025] Radio Activation Restore
Default (FF) Program 00 disable or FF enable.
43

DSC LE2080 Specifications

General

Brand	DSC
Model	LE2080
Category	Security System
Language	English