DSC LE2080 Installation Manual

[856] Activate Command Output 2
Default (Activate Command Output 2)
_______________________________________
[857] Activate Command Output 3
Default (Activate Command Output 3)
_______________________________________
[858] Activate Command Output 4
Default (Activate Command Output 4)
_______________________________________
[859] Deactivate Command Output 1
Default (Deactivate Command Output 1)
_______________________________________
[860] Deactivate Command Output 2
Default (Deactivate Command Output 2)
_______________________________________
[861] Deactivate Command Output 3
Default (Deactivate Command Output 3)
_______________________________________
[862] Deactivate Command Output 4
Default (Deactivate Command Output 4)
_______________________________________
[863] Bypass
Default (Bypass)
_______________________________________
[864] Unbypass
Default (Unbypass)
_______________________________________
[865] Status Request
Default (Status Request)
_______________________________________
[866] Alarm Memory Request
Default (Alarm Memory Request)
_______________________________________
[867] Help
Default (Help)
_______________________________________
[868] Pay As You Go Balance Request
Default (Balance Request)
_______________________________________
[869] Keypad Message
Default (Keypad Message)
_______________________________________
[870] Function Successful
Default (Successful)
_______________________________________
[871] Function Failure
Default (Unsuccessful)
_______________________________________
[872] Invalid Command
Default (Invalid Command)
_______________________________________
[873] System Stay Armed
Default (Stay Armed)
_______________________________________
[874] System Away Armed
Default (Away Armed)
_______________________________________
[875] System Night Armed
Default (Night Armed)
_______________________________________
[876] System Disarmed Ready
Default (Disarmed Ready)
_______________________________________
[877] System Disarmed, Not Ready
Default (Disarmed Not Ready)
_______________________________________
[878] System In Alarm
Default (is in Alarm)
_______________________________________
[879] Trouble Label
Default (Service is Required)
_______________________________________
[880] No Alarms in Memory
Default (No Alarms in Memory)
_______________________________________
[881] Pay As You Go Balance
Default (Pay as you go balance:)
_______________________________________
[882] Pay As You Go Message
Default (*123#)
_______________________________________
[883] Response Code
Default (Response Code)
_______________________________________
Receiver Diagnostic Testing
[901] Diagnostic Test Transmission
[1] Ethernet 1 Default (OFF).
[2] Ethernet 2 Default (OFF).
[3] Cellular 1 Default (OFF).
[4] Cellular 2 Default (OFF).
[961] Cellular Inactivity Timeout
Default (41)
Valid entries from, 00 to FF.
[962] CREG Max Registration
Default (C8)
Valid entries from, 00 to FF.
[963] Retransmission Delay
Default (2D)
Valid entries from, 00 to FF.
54

DSC LE2080 Specifications

General

Brand	DSC
Model	LE2080
Category	Security System
Language	English