EasyManuals Logo

DSC LE2080 Installation Manual

DSC LE2080
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
Default (ON)
[5] SMS Notification System Test Default (ON)
[6] SMS Notification Internal Events Default
(ON).
[7] SMS Notification Enabled Default (ON).
[8] SMS Command and Control Enabled
Default (ON).
[375]-[406] SMS Phone Number 1-32 Partition
Assignment
Default (00) Valid range: 00 - FF.
00 - Global; 01-32 - Partition; FF - Disabled
[420] Serial Port Baud Rate ('R' models only)
Default (05)
01=9600 Baud; 02=19200 Baud; 03=38400 Baud;
04=57600 Baud; 05=115200 Baud
[421] Serial Port Settings ('R' models only)
[1] Parity Enabled (OFF)
[2] Parity Type (OFF-Even Parity)
[3] 2 Stop Bit s (OFF-1 Stop Bit)
[4] Flow Control (OFF)
[422] Integration Identification Number
Default (MAC/IMEI)
[423] Session 1 Integration Access Code
Default (12345678) Valid range: 00000000 -
FFFFFFFF
[424] Session 1 SMS Label
Default (11111111)
_______________________________________
_______
[425] Session 1 Integration Toggle Options 2
[1] Integration Over Serial Port (ON)
[2] Integration Over Cellular (OFF)
[3] Integration Over Ethernet (OFF)
[4] Reserved
[5] Integration Protocol (ON)
[6] Interactive Protocol SMA (OFF)
[7] Reserved
[8] Interactive Encryption for SMA (ON)
[426] Session 1 Integration Toggle Options 3
[1] UDP Polling (OFF)
[2] TCP Polling (OFF)
[3] Real-time Notification (OFF)
[4] Notification Follows Pool (OFF)
[5] Reserved
[6] Reserved
[7] Reserved
[8] Reserved
[427] Session 1 Interactive Polling Interval
Default (000A) Valid range: 0000 - FFFF seconds.
[428] Session 1 Integration Server IP
Default (000.000.000.000)
[429] Session 1 Integration Notification Port
Default (0C00/00372) Valid range: 0000 - FFFF.
[430] Session 1 Integration Polling Port
Default (0C01/3073) Valid range: 0000 - FFFF.
[431] Session 1 Integration Server DNS
32 ASCII characters.
____________________________________
[432] Session 1 Integration Outgoing Port
Default (0C04/3076) Valid range: 0000 - FFFF.
[433] Session 1 Integration Incoming Port
Default (0BFF/3071) Valid range: 0000 - FFFF.
[434] Session 1 Notification Zone 1-8 Toggle
[1] Zone 1 Default (ON)
[2] Zone 2 Default (ON)
[3] Zone 3 Default (ON)
[4] Zone 4 Default (ON)
[5] Zone 5 Default (ON)
[6] Zone 6 Default (ON)
[7] Zone 7 Default (ON)
[8] Zone 8 Default (ON)
[435] Session 1 Notification Zone 9-16 Toggle
[1] Zone 9 Default (ON)
[2] Zone 10 Default (ON)
[3] Zone 11 Default (ON)
[4] Zone 12 Default (ON)
[5] Zone 13 Default (ON)
[6] Zone 14 Default (ON)
[7] Zone 15 Default (ON)
[8] Zone 16 Default (ON)
[436] Session 1 Notification Zone 17-24 Toggle
[1] Zone 17 Default (ON)
[2] Zone 18 Default (ON)
[3] Zone 19 Default (ON)
46

Table of Contents

Other manuals for DSC LE2080

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DSC LE2080 and is the answer not in the manual?

DSC LE2080 Specifications

General IconGeneral
BrandDSC
ModelLE2080
CategorySecurity System
LanguageEnglish

Related product manuals